Acclimate hardwood before installation
Most failed hardwood installs come from one mistake: skipping acclimation. Five to ten days on site is non-negotiable.
What you'll learn
- Why hardwood gaps and cups when acclimation is skipped
- How long is "long enough", 5 to 10 days, location-dependent
- How to set up the room for proper acclimation (HVAC running, boxes opened)
- How to pin-meter board moisture vs. subfloor moisture before laying
Step by step
- Deliver hardwood to the room 5 to 10 days before install date.
- Open the boxes, do not stack closed boxes.
- Cross-stack the boards in small piles to allow airflow on all sides.
- Run HVAC at the temperature and humidity the home will live in.
- Pin-meter random boards before install. Confirm within 4% of subfloor moisture.
Safety note
Coastal San Diego homes need the longer end of the range, 8 to 10 days. Inland and East County are usually fine at 5 to 7 days. The matched pro pin-meters every install before nailing.
Rather have a pro handle it?
Call and we connect you with a local flooring pro across San Diego County.
More guides
Keep learning.
Basics · 6 min watch
Moisture-test a concrete slab
If you skip slab moisture testing, your floor will tell you about it 6 to 18 months later. Test before you install.
Basics · 7 min watch
Install LVP over existing tile
Pulling out tile is expensive and messy. If the existing tile is sound, you can usually float LVP right over it.
Maintenance · 4 min watch
Clean hardwood floors the right way
More hardwood finish damage comes from cleaning than from foot traffic. The right method takes 5 minutes.